Carpentry and Furniture Workshop

← Catalogue

№ 9Collecting now

Carpentry and Furniture Workshop

From rough cut to final cut.

Bespoke furniture makers, modular kitchen and wardrobe workshops, and joinery shops.

Useful for

Predicting cuts, clamping and marking on wood
Power-tool use
Assembly

Get free sample data

Task groups: 6
Tasks: 29
Hours: Ask for the count
Narration: —
Sample footage: Ready

On the job.

Pick a clip. Its whole recording sits below.

Camera file or proxy, as each HUD says. Tasks are a reviewer's reading.
Notes (3)
FV-B01851 · 900.0–908.0 s: camera file 1920×1080 · 50 fps
FV-C01464 · 1500.0–1508.0 s: camera file 1920×1080 · 50 fps; blurred: part of the wearer's face at the bottom edge; carved strip at the left.
FV-C01442 · 1200.0–1208.0 s: camera file 1920×1080 · 50 fps; blurred: a stencil board at the bottom left; a stencil board passing at the bottom; another person in the doorway.

Camera file or proxy, as each HUD says. Tasks are a reviewer's reading.
Notes (3)
FV-B01851 · 900.0–908.0 s: camera file 1920×1080 · 50 fps
FV-C01464 · 1500.0–1508.0 s: camera file 1920×1080 · 50 fps; blurred: part of the wearer's face at the bottom edge; carved strip at the left.
FV-C01442 · 1200.0–1208.0 s: camera file 1920×1080 · 50 fps; blurred: a stencil board at the bottom left; a stencil board passing at the bottom; another person in the doorway.

Carpentry and Furniture Workshop, first-person still: FV-B01851 at 233.1 s — **FV-B01851**whole recording1554.1 s5 stills across the whole 1554.1 s recording, at their file times. The loop above is 900.0 to 908.0 s of it.

Carpentry and Furniture Workshop, first-person still: FV-B01851 at 527.3 s — **FV-B01851**whole recording1554.1 s5 stills across the whole 1554.1 s recording, at their file times. The loop above is 900.0 to 908.0 s of it.

Also on the wall.

More clips of this work play on the home page.

See them there

What they show

Hands close together on a small partFV-B01264 · 2316.1 sproxy
Holds a red power tool to a small wooden piece (planer or trim router)FV-B01690 · 188.6 sproxy
Turns and fits a routed moulding; re-grips small partsFV-B01690 · 589.0 sproxy
Joint work on a carpentry floorFV-B01794 · 1431.7 sproxy
Sharpens a pencil with pinch grips, then the head lifts to the roomFV-B01810 · 222.0 sproxy
Ruler on a white sheet; hands overlapFV-B01810 · 386.5 sproxy
Hand-held circular saw kept on a steel guide stripFV-B01822 · 105.0 s
Screwdriver and a wire end in both handsFV-B01827 · 544.8 s
Twists and strips a wire end at a cluttered benchFV-B01827 · 561.3 s
Fits a polishing pad on an angle grinder, then holds the grinderFV-B01835 · 390.0 sproxy
Tape measure and red pencil on an MDF panelFV-B01851 · 492.0 s
Holds a long green-edged strip; works its end with a red toolFV-C01321 · 285.7 s
Sticks small tabs round a glass or stone disc on the lapFV-C01418 · 1591.5 sproxy
Marks a round plate along a steel ruleFV-C01419 · 199.7 sproxy
Kneeling: try-square in the left hand, pencil marking in the rightFV-C01442 · 171.8 s
Panel work outdoorsGX010007 · 699.6 sproxy
Wipes a board with a cloth outdoorsGX010125 · 173.4 sproxy
Steel square to a board edge, then pencil markingGX010445 · 663.0 s
Both hands on a small partGX010445 · 1135.0 s
Peels protective film off a laminate sheet on siteGX011161 · 741.2 s

Each line is a reviewer's reading, not a label.

Seen again asrobot video (Fig. 7)

Rated 1 to 5 from the shot list, not measured

Hand-object densityBimanual fine-motorTool varietyLighting variance

Conditions dust, power tools

Pick your tasks.

Tick any to add it to your quote.

9.1
9.2
9.3
9.4
9.5
9.6

9.1 Layout and cutting

9.1.01Measuring and marking outsample footage
9.1.02Cut-⁠list preparationno sample footage
9.1.03Stock cutting (table and mitre saw)no sample footage
9.1.04Sheet goods breakdownno sample footage
9.1.05Jointing and planingno sample footage

9.2 Shaping and joinery

9.2.01Routing and edge profilingno sample footage
9.2.02Drilling and dowelingno sample footage
9.2.03Mortise and tenon cuttingno sample footage
9.2.04Dado and rabbet cuttingno sample footage
9.2.05Biscuit and domino joineryno sample footage

9.3 Assembly

9.3.01Clamping and glue-⁠upno sample footage
9.3.02Furniture assemblyno sample footage
9.3.03Hardware installationno sample footage
9.3.04Hinge and drawer fittingno sample footage
9.3.05Drawer slide alignmentno sample footage
9.3.06Knock-⁠down fitting assemblyno sample footage

9.4 Surface and finish

9.4.01Sanding and surface preparationno sample footage
9.4.02Filling, patching and grain fillingno sample footage
9.4.03Staining and finishingno sample footage
9.4.04Spray and brush lacqueringno sample footage
9.4.05Veneer lamination and pressingno sample footage
9.4.06Buffing and waxingno sample footage

9.5 Upholstery and soft goods

9.5.01Foam cutting and paddingno sample footage
9.5.02Fabric stapling and tackingno sample footage
9.5.03Webbing and spring workno sample footage

9.6 Shop operations

9.6.01Workshop cleanup and offcut sortingno sample footage
9.6.02Dust collection emptyingno sample footage
9.6.03Blade and bit changesno sample footage
9.6.04Jig and fixture setupno sample footage

Data cardEgocentric video, from a head or chest camera.

Cameras: GoPro HERO10 Black, HERO12 Black
Picture: 1920×1080 to 3840×2160, 50 fps
Motion data: IMU at a nominal 200 Hz on the video clock, where recorded; 197 to 200 Hz measured
Labels: Task codes 9.1.01 to 9.6.04, in order on the video clock; final labels only
Formats: Camera originals; also LeRobot v3, RLDS, HDF5 or MCAP
Licence: Per quotation, for machine-learning research and development Terms →

Four files per clip.

FV-C00456/
FV-C00456.MP4original camera file, telemetry intact
FV-C00456_imu.csvtimestamp_us, ax, ay, az, gx, gy, gz
FV-C00456_labels.jsonordered segments, codes 9.1.01 …
FV-C00456_meta.jsondevice, mount, site, collector, consent